CRACKED FAST? YOU DO NOT HAVE TO REPLACE THE SCREEN WITH A NEW ONE!

Cracked quick screen on your smartphone or tablet mistakenly associated with the need to replace the entire display module and the high price of the service. The use of methods refabrykacji offered by many sites can not only reduce repair costs by up to half, but also keep the original display.

It is generally considered that the only way to repair the damaged fast to mount a new complete display module, and thus the screen layer and the protective touch. This method, despite the ease of execution, has one major drawback – the service can cost as much as 1/3 of the equivalent price of a new device. Same screens used for repair, they are also most often substitutes that do not always come from the same plant as the original screen. Refabrykacja screen, or else his dissection, is a method, which is mentioned only damaged component, which cracked fast outer layer of touch. Therefore, to enable repair is an efficient display and other elements of the smartphone or tablet. refabrykacji process consists of several steps and starts with the separation of the two main layers – the damaged fast digitizer (touch sensitive layer) and the screen. Standard, flat-panel displays are mechanically separated by molybdenum wire of suitable thickness, in the case of a curved screen, it is necessary to provide the separator cryogen, ie. Freezing at precisely controlled temperature and chipping of the adhesive layer.

Napraw uszkodzonego ekranu przez refabrykację może być nawet o 50% tańsza od wymiany na nowy

it needs careful to remove all remnants of the broken glass and a special glue OCA (Optical Crystal Adhesive) or LOCA (Liquid Crystal Optical Adhesive), which combines the individual elements. It is used for the dedicated solvent. Then peel off the old serviceman polarizer display using the so-called. guillotine preheated to a temperature and clears the screen cleaner, adapted to the type of adhesive. After preconditioning, the module goes into the chamber in a laminar dust-free zone, that is again cleaned in a sterile environment, using a suitable alcohol. On display so prepared is applied to the new polarizer with a layer of glue OCA and the glass. The last step is to place the display unit in a special chamber – autoclave, in which, at an appropriate temperature and pressure, all elements are rigidly connected. Said chamber prevents the formation of air bubbles and imperfections between the glued layers.

Zamiast wymieniać wyświetlacz na zupełnie nowy, lepiej naprawić zepsuty – w niektórych przypadkach

After the repair work, all the functions are tested. The greatest emphasis is on action digitizer, and tests used in special applications or applications licensed test provided by the manufacturer, which is activated in the service menu of the device. The biggest advantage of this method is the fact that the device remains the original display, installed by the manufacturer. With screens of high quality – mainly AMOLED and Retina – it is very important. Despite the fact that the same process seems complicated, the cost of such repair is about 50% of the replacement of the entire display module. Development: gorepair.pl